Home › Services › Thermostat problems
Problem guideThermostat problems: blank screens, wrong readings and no call
The thermostat is the smallest part of the system and one of the most common causes of a no-cool call. It decides when to call for cooling and it reports the temperature it measures, which is not always the temperature in the room. Before anyone diagnoses refrigerant, confirm the thermostat is powered, configured correctly, and actually sending a call.
- Independent referral service
- No charge to homeowners
- One contractor receives your request
- No ratings or paid placements
Request a callback
Describe the symptom and your ZIP. One contractor receives it if one serves your ZIP.
Symptoms
- Blank or flickering display.
- The system runs constantly or never runs, regardless of the set point.
- The displayed temperature is several degrees off from a room thermometer.
- The fan runs but cooling does not, or cooling runs with the fan on AUTO and stops before the set point.
- A smart thermostat shows offline or loses its schedule.
Safe checks you can do
- Replace the batteries if the thermostat uses them.
- Confirm the mode is COOL and the fan is AUTO, not ON.
- Check the breaker for the air handler; a thermostat powered by the air handler goes dark when that circuit is off.
- Remove the thermostat from its base (if it is a plug-in model) and check for corrosion on the pins.
- Compare the displayed temperature with a separate thermometer placed nearby. A 3 F or greater difference matters.
- Check the schedule and any geofencing or away mode in the app.
Likely causes
- Dead batteries or lost power — The simplest cause, and common with battery-powered models.
- Misconfiguration — A heat pump configured as a straight AC, or a fan set to ON, produces comfort complaints that look like equipment faults.
- Failed thermostat — A thermostat that no longer closes the cooling contact will not start the system.
- Low-voltage wiring fault — A broken wire, a blown fuse or a bad splice between the thermostat and the air handler.
- Location problem — A thermostat on a sunlit wall or near a supply vent reads a temperature that does not represent the room.
What a repair involves
The technician checks 24-volt power at the thermostat, continuity on the control wires, and the thermostat's call at the air handler. If the thermostat is faulty, replacement is straightforward. If the wiring or the control board is at fault, the repair follows the circuit. Smart thermostats may need a common wire, which is a separate small job.
Typical South Florida cost ranges
| Work | Published typical range | Notes |
|---|---|---|
| Diagnostic or service visit | $69–$250 | |
| Thermostat replacement | $100–$500 | Basic to smart models; premium models cost more. |
| Low-voltage wiring repair | $100–$300 | Depends on the run and access. |
Source: AC Service Pro (South Florida contractor cost guide), published 2026-07-13; Koala Coolin (South Florida contractor cost guide), published 2026-07-12. Both guides publish installed price ranges for South Florida; neither states its sample size. These are ranges, not quotes. The contractor sets the actual price after inspecting the system, and you approve it before work begins. See the cost guide methodology.
Seasonal context
Thermostat batteries often die after a season of disuse. If the system is unresponsive on the first hot day, check the batteries before assuming the worst.
Where to go next
Find your city · Cost guide methodology · What to check before you call · All services
How a request is handled
Your request includes the symptom, your ZIP code, how soon you need help and the best time to reach you. If a participating contractor covers your ZIP, that one contractor receives it.
If no participating contractor covers the ZIP yet, we tell you and your request is not shared with anyone else.
We do not promise an arrival time. The contractor confirms availability with you directly.
Questions
Why is my thermostat blank but the AC still runs?
Some systems run on a schedule or a separate control. A blank smart thermostat with a running system suggests a display or power fault rather than a total failure.
Does a smart thermostat save money in South Florida?
It can help with scheduling and away modes, but savings depend on the house, the rate plan and how the system is used. A smart thermostat will not fix an undersized duct system or a low charge.
Can I move my thermostat?
Yes, but the new location must be out of direct sun and away from supply vents and exterior walls. Moving one requires new low-voltage wiring.
Request a callback
One contractor, if one serves your ZIP. No charge to you.
Request a callback
Tell us what is wrong. If a participating contractor serves your ZIP code, your request goes to that one contractor.